PXD025754-1

PXD025754 is an original dataset announced via ProteomeXchange.

Title	DDX21 is a p38-MAPK sensitive nucleolar protein necessary for mouse preimplantation embryo development and cell-fate specification
Description	2-cell (E1.5) stage embryos were cultured in normal KSOM+AA conditions until E3.5 +2h and thereafter 100 embryos each were moved to control or p38-MAPKi conditions and cultured for another 7 hours (E3.5 +9h). The embryos were then washed through pre-warmed (37˚C) Hank’s balanced salt solution (HBSS, Sigma-Aldrich; Cat. No. H9269) and lysed by moving to a 1.5ml centrifuge tube containing about 15µl of SDT-lysis buffer (4% (w/v) SDS, 100 mM Tris-HCl pH 7.6, 0.1 M DTT). Cell lysis was performed by incubating the tubes in a 95˚C thermoblock for 12 minutes, brief centrifugation at 750 rpm, cooling to room temperature and storage at -80˚C. Individual protein solutions were processed by filter-aided sample preparation (FASP) method with some modifications (see the associated publication for more details). Resulting peptides were cleaned by liquid-liquid extraction (3 iterations) using water saturated ethyl acetate. 1/10th of the FASP eluate was taken out for direct LC-MS measurements, evaporated completely in SpeedVac concentrator (Thermo Fisher Scientific). Peptides were further transferred into LC-MS vials using 50μL of 2.5% formic acid (FA) in 50% acetonitrile (ACN) and 100μL of pure ACN and with addition of polyethylene glycol (final concentration 0.001%) and concentrated in a SpeedVac concentrator. Phosphopeptides were enriched from the remaining 9/10th of the cleaned FASP eluate after complete solvent evaporation (SpeedVac concentrator) using High-Select™ TiO2 Phosphopeptide Enrichment Kit (Thermo Fisher Scientific) according to manufacturer protocol. Phosphopeptide standards (0.1 pmol of MS PhosphoMix 1, 2, 3 Light; Sigma-Aldrich, St. Louis, Missouri, USA) was added to suspended sample in binding/equilibration buffer. Flow-through fraction was dried and used for second enrichment step using High-Select™ Fe-NTA Phosphopeptide Enrichment Kit (Thermo Fisher Scientific, Waltham, Massachusetts, USA) according to manufacturer protocol. Resulting phosphopeptides were extracted into LC-MS vials by 2.5% FA in 50% ACN and 100% ACN with addition of polyethylene glycol (final concentration 0.001%) and concentrated in a SpeedVac concentrator). LC-MS/MS analyses of all peptide mixtures (2 peptide solutions for each sample – 1) not enriched; 2) enriched on phosphopeptides using TiO2 enrichment kit) were done using RSLCnano system connected to Orbitrap Fusion Lumos mass spectrometer (Thermo Fisher Scientific). Prior to LC separation, tryptic digests were online concentrated and desalted using trapping column (100 μm × 30 mm, column compartment temperature of 40˚C) filled with 3.5-μm X-Bridge BEH 130 C18 sorbent (Waters). After washing of trapping column with 0.1% FA, the peptides were eluted (flow rate - 300nl/min) from the trapping column onto an analytical column (Acclaim Pepmap100 C18, 3 µm particles, 75 μm × 500 mm; column compartment temperature of 40˚C, Thermo Fisher Scientific) by using 50 or 100 minutes long nonlinear gradient program (1-56% of mobile phase B; mobile phase A: 0.1% FA in water; mobile phase B: 0.1% FA in 80% ACN) for analysis of phosphopeptide enriched fractions or not enriched peptide mixtures, respectively. Equilibration of the trapping column and the analytical column was done prior to sample injection to sample loop. The analytical column outlet was directly connected to the Digital PicoView 550 (New Objective) ion source with sheath gas option and SilicaTip emitter (New Objective; FS360-20-15-N-20-C12) utilization. ABIRD (ESI Source Solutions) was installed. MS data were acquired in a data-dependent strategy with cycle time for 3 seconds and with survey scan (350-2000 m/z). The resolution of the survey scan was 60000 (200 m/z) with a target value of 4×105 ions and maximum injection time of 50ms. HCD MS/MS (30% relative fragmentation energy, normal mass range) spectra were acquired with a target value of 5.0x104. The MS/MS spectra were recorded in Orbitrap at resolving power of 30,000 or 15,000 (200 m/z) and the maximum injection time for MS/MS was 500 or 22 ms for analysis of phosphopeptides enriched fraction or non-enriched peptide mixture, respectively. Dynamic exclusion was enabled for 60 seconds after one MS/MS spectra acquisition. The isolation window for MS/MS fragmentation was set to 1.6 m/z.
HostingRepository	PRIDE
AnnounceDate	2021-07-12
AnnouncementXML	Submission_2021-07-11_21:53:10.885.xml
DigitalObjectIdentifier
ReviewLevel	Peer-reviewed dataset
DatasetOrigin	Original dataset
RepositorySupport	Unsupported dataset by repository
PrimarySubmitter	David Potesil
SpeciesList	scientific name: Mus musculus (Mouse); NCBI TaxID: 10090;
ModificationList	phosphorylated residue
Instrument	Orbitrap Fusion Lumos

Revision	Datetime	Status	ChangeLog Entry
0	2021-05-02 23:39:17	ID requested
⏵ 1	2021-07-11 21:53:11	announced

Dataset with its publication pending

submitter keyword: DDX21, p38-MAPK, preimplantation embryo development, cell fate specification, LC-MSMS

Zbynek Zdrahal
contact affiliation	Proteomics Core Facility and Research Group Proteomics, CEITEC-MU, Masaryk University, Brno, Czech Republic
contact email	zdrahal@sci.muni.cz
lab head
David Potesil
contact affiliation	Proteomics Core Facility and Research Group Proteomics CEITEC-MU Masaryk University Brno, Czech Republic
contact email	david.potesil@ceitec.muni.cz
dataset submitter

Dataset FTP location NOTE: Most web browsers have now discontinued native support for FTP access within the browser window. But you can usually install another FTP app (we recommend FileZilla) and configure your browser to launch the external application when you click on this FTP link. Or otherwise, launch an app that supports FTP (like FileZilla) and use this address: ftp://ftp.pride.ebi.ac.uk/pride/data/archive/2021/07/PXD025754

PRIDE project URI

• PRIDE
  1. PXD025754
     1. Label: PRIDE project
     2. Name: DDX21 is a p38-MAPK sensitive nucleolar protein necessary for mouse preimplantation embryo development and cell-fate specification